11 DIY Fall Wreath Ideas Your Home Needs this Fall

Grab a grapevine base and start layering.

Yes, that’s how simple it is to make a wreath, and you don’t need much!

Mix textures first, like dried wheat, mini pumpkins, eucalyptus, then add color in odd-numbered clusters (I would say three look amazing).

Use a hot-glue gun or E6000 to hold everything together.

Actually, use them together for long-term strength and quick fixing!

And for a whole porch makeover, you can add a plaid ribbon bow with a few faux berries for pops of red (my favorite decor tip!)

What do You Need to Make a DIY Fall Wreath?

Grapevine or straw wreath base: 16-18 inches
Floral wire: 22-gauge, one spool
Hot glue gun and extra glue sticks: at least 6
Faux fall florals: 3-4 stems each of wheat, eucalyptus, and mums
Mini pumpkins or gourds (faux): 3, in varying sizes for that layered, styled look
Wired ribbon: 2.5 inches wide, 3 yards, for a full bow
Wire cutters
Faux berry picks: 2-3 stems for pops of color
Command hook or wreath hanger: At least 5 lbs

Buy a size up on the base, as a fuller wreath always looks more expensive.

How to Make a Fall Wreath?

Think of it like building an outfit, start with the base, then add texture, then the statement piece.

Work on a flat surface like a table so you can spin the wreath as you go and check for gaps from every angle. Don’t rush the layering step.

Ready? Let’s build it.

Step 1: Prep Your Base

Start by fluffing out your grapevine or straw base with your hands, pulling the vines slightly apart so there’s room to tuck stems in later.

If you’re using a straw base, wrap it loosely in burlap or ribbon first so no straw peeks through the gaps.

Cut a small loop of floral wire and attach it to the back now, before you add anything.

Propping the wreath against a mirror while you work helps you catch any lopsided spots in real time.

Step 2: Add Your Greenery First

You can add eucalyptus and wheat stems.

Cut each stem to about 4-5 inches and tuck them into the vines at varying angles, alternating direction so it doesn’t look like one straight row.

Aim to cover roughly 70% of the base with them before adding anything more.

Hot glue the stem ends only where they meet the vine, not the tips, so the texture stays natural and wild.

It would look amazing if you layer greenery in odd numbers (3, 5, 7 stems per cluster), looks as if efforts were made.

Step 3: Layer in Florals and Mums

Now bring in your faux mums and any accent florals, clustering them in two or three spots rather than putting it everywhere.

Start by placing your biggest cluster where a bow or focal point will go, then a smaller echo cluster opposite it.

Cut the stems short, about 2-3 inches, so they nestle into the greenery. Glue at the base of each stem and hold for 10 seconds so it sets into the vine.

Step 4: Add Pumpkins and Berries

Now let’s have a little fun.

Nestle your mini pumpkins into the fullest cluster, glue them at an angle rather than flat so they get the light.

Tuck berry picks in the gaps between pumpkins and florals for little pops of color and that festive feel. Keep pumpkins grouped rather than scattered.

Vary the pumpkin sizes (one large, one medium, one small) for a more organic feel.

Step 5: Tie the Bow

Cut a 3-yard length of your wired ribbon and make a classic multi-loop bow.

Six to eight loops look put together rather than overdoing it. Secure the center with a small piece of floral wire, twisting it tightly at the back before fluffing each loop into place.

Position the bow slightly off-center rather than dead center.

Glue or wire the bow directly onto your main floral cluster so it doesn’t keep falling.

Leave the ribbon tails long, then trim them in a V-shape at an angle for a polished, finished look.

Step 6: Hang and Admire

Attach your wreath to a Command hook or over-the-door hanger rated for at least 5 lbs.

If anything looks sparse, tuck in one or two extra greenery stems. Once it’s hung, give it a final fluff since travel and gravity tend to flatten things slightly.

Easy DIY Fall Wreath Ideas to Try

A wreath doesn’t have to follow one formula; swap the color palette, the texture, or the focal piece, and you get a completely different look with the same piece.

Pick whichever matches your porch, your party theme, or just your mood this season.

1. Rustic Wheat and Wood Wreath

Try the wheat stalks, dried grasses, and small wood slice accents.

Cluster the wheat in one large sweep across the bottom third of the wreath rather than spacing it evenly. It seems more like a harvest bundle that way.

Add two or three thin wood slices tucked between the stalks for a natural, farmhouse feel.

And add a jute or burlap bow and say goodbye to the stark orange ones!

2. Berry and Bittersweet Wreath

Layer faux bittersweet vine loosely around the base first, and let it trail slightly instead.

Add clusters of red and burgundy berry picks in three spots, mimicking the odd-number rule to keep it from looking too uniform.

This looks beautiful with a deep plum or wine-colored ribbon instead of the usual orange or brown.

3. All-White Pumpkin Wreath

A monochrome wreath feels unexpected for fall, especially with all the oranges we always see.

Use white and cream mini pumpkins as your cluster, paired with pale eucalyptus or dusty miller for greenery instead of the usual deep green.

And you can also add pampas grass to make it even more attractive yet subtle.

You can also add a neutral linen bow for a monochrome look. This idea is best for your front door or porch decor.

4. Flannel and Plaid Ribbon Wreath

This feels so cozy, just to even look at it.

I once made one using my old flannel shirt, some green branches, and red Christmas ornaments.

Start with simple greenery, and you can also add a few small pumpkins, then add a wide flannel or plaid ribbon.

Finish with a slightly oversized bow. I say the bigger, the better and cozier. It’s easy to recreate if you’re short on time but still want it to look like you put in effort.

5. Sunflower Statement Wreath

For a bright, cheerful wreath rather than a moody one, sunflowers make the perfect focal point.

Use two or three large faux sunflower stems as your anchor cluster, positioning them slightly off-center for visual interest.

Fill in around them with soft greenery like fern or eucalyptus to let the yellow really pop. A simple burlap or mustard-colored ribbon keeps the focus on the flowers.

6. Autumn Leaves Only Wreath

Layer leaves in varying shades- deep red, burnt orange, golden yellow- directly onto the base, overlapping them like shingles for a full, textured look.

You can skip the ribbons, add a few small pumpkins, and let the leaves shine!

Vary the leaf sizes as you glue for a more organic look, so it doesn’t look flat and boring. It’s an easy, budget-friendly idea if you already have loose leaf stems on hand.

7. Black and Orange Halloween-Fall Hybrid Wreath

If your fall decor transitions straight into Halloween, this wreath is the best of both.

Combine traditional fall elements, wheat, mini pumpkins, with a few unexpected black accents like dark ribbon or faux black feathers.

Keep the orange pumpkins as your main cluster, then add the black elements, and you’ve got a beautiful accent piece.

A wide black-and-orange plaid ribbon ties the two themes together. This is perfect for anyone who feels a little lazy to swap out their door decor twice in one season.

8. Woodland Pinecone Wreath

Cluster the pine cones in groups of three or five around the base, mixing in small twigs and pine sprigs for texture.

Avoid any bright colors and stick to a natural, earthy palette like browns, deep greens, and muted golds.

You can also add a simple twine or burlap bow if you feel like it.

This idea works especially well if you live somewhere with real pine trees nearby, an easy personalized DIY.

9. Copper and Metallic Accent Wreath

Want something with a little shimmer?

Yes, last year I made a copper and gold metallic wreath and of course golden pumpkins too!

Keep the metallic elements to just two or three rather than scattering them throughout. You can also pair with a matching copper wired ribbon for a cohesive, slightly glam look.

Make it for an evening fall gathering, since the metallic touches catch string lights beautifully.

10. Half-Wreath Table Runner Style

Not every fall wreath has to hang on a door. You can hang a runner wreath on the top of your door.

Add the same materials, greenery, mini pumpkins, berries, and ribbon, and build a half-wreath shape to lay along the corner of your door.

This idea is a great way to repurpose leftover wreath supplies into a new style of decor piece.

11. Mini Wreath Cluster for Windows

Instead of one large statement wreath, try grouping three or four mini wreaths (6 to 8 inches each) across a window or mantel.

Keep each mini wreath simple: one type of greenery, one small pumpkin or berry cluster, so they don’t look cluttered.

You can vary the ribbon colors or keep them the same. I often do the same!

This idea is for renters or small spaces where a full-sized wreath might feel like too much, and it’s also an easy weekend project to make with kids.

How Much Does a DIY Fall Wreath Cost?

A DIY fall wreath typically costs between $20 and $45 depending on your material choices.

A grapevine base runs about $8 to $12, while faux florals and greenery add another $10 to $15. Mini pumpkins, berry picks, and ribbon usually bring the total up by $10 to $15 more.

And if you’re shopping in dollar-store or clearance sections, it can bring the cost closer to $20.

Premium silk florals cost around $50 and higher.

Well, happy fall! Enjoy DIY-ing your decor, or you can even make it a fun little family activity, and it’s affordable too!